Laminar flow-based microfluidic systems for molecular interaction analysis-Part 2: Data extraction, processing and analysis.

The rate at which fluorescently-labeled biomolecules, that are flowing at a constant speed in a microfluidic channel, diffuse into an adjacent buffer stream can be used to calculate the diffusion coefficient of the molecule, which then gives a measure of its size. Experimentally, determining the rate of diffusion involves capturing concentration gradients in fluorescence microscopy images at different distances along the length of the microfluidic channel, where distance corresponds to residence time, based on the flow velocity. The preceding chapter in this journal covered the development of the experimental setup, including information about the microscope camera detection systems used to acquire fluorescence microscopy data. In order to calculate diffusion coefficients from fluorescence microscopy images, intensity data are extracted from the images and then appropriate methods of processing and analyzing the data, including the mathematical models used for fitting, are applied to the extracted data. This chapter begins with a brief overview of digital imaging and analysis principles, before introducing custom software for extracting the intensity data from the fluorescence microscopy images. Subsequently, methods and explanations for performing the necessary corrections and appropriate scaling of the data are provided. Finally, the mathematics of one-dimensional molecular diffusion is described, and analytical approaches to obtaining the diffusion coefficient from the fluorescence intensity profiles are discussed and compared.

Laminar flow-based microfluidic systems for molecular interaction analysis-Part 1: Chip development, system operation and measurement setup.

The recent advent of laminar flow-based microfluidic systems for molecular interaction analysis has enabled transformative new profiling of proteins in regards to their structure, disordering, complex formation and interactions in general. Based on the diffusive transport of molecules perpendicular to the direction of laminar flow in a microfluidic channel, systems of this type promise continuous-flow, high-throughput screening of complex, multi-molecule interactions, while remaining tolerant to heterogeneous mixtures. Using common microfluidic device processing, the technology provides unique opportunities, as well as device design and experimental challenges, for integrative sample handling approaches that can investigate biomolecular interaction events in complex samples with readily available laboratory equipment. In this first chapter of a two-part series, we introduce system design and experimental setup requirements for a typical laminar flow-based microfluidic system for molecular interaction analysis in the form of what we call the 'LaMInA system' (Laminar flow-based Molecular Interaction Analysis system). We provide microfluidic device development advice on choice of device material, device design, including impact of channel geometry on the signal acquisition, and on design limitations and possible post-fabrication treatments to redress these. Finally. we cover aspects of fluidic actuation, such as selecting, measuring and controlling the flow rate appropriately, and provide a guide to possible fluorescent labels for proteins, as well as options for the fluorescence detection hardware, all in the context of assisting the reader in developing their own laminar flow-based experimental setup for biomolecular interaction analysis.

On the utility of microfluidic systems to study protein interactions: advantages, challenges, and applications.

Within the complex milieu of a cell, which comprises a large number of different biomolecules, interactions are critical for function. In this post-reductionist era of biochemical research, the 'holy grail' for studying biomolecular interactions is to be able to characterize them in native environments. While there are a limited number of in situ experimental techniques currently available, there is a continuing need to develop new methods for the analysis of biomolecular complexes that can cope with the additional complexities introduced by native-like solutions. We think approaches that use microfluidics allow researchers to access native-like environments for studying biological problems. This review begins with a brief overview of the importance of studying biomolecular interactions and currently available methods for doing so. Basic principles of diffusion and microfluidics are introduced and this is followed by a review of previous studies that have used microfluidics to measure molecular diffusion and a discussion of the advantages and challenges of this technique.

Is now the time for a Rubiscuit or Ruburger? Increased interest in Rubisco as a food protein.

Much of the research on Rubisco aims at increasing crop yields, with the ultimate aim of increasing plant production to feed an increasing global population. However, since the identification of Rubisco as the most abundant protein in leaf material, it has also been touted as a direct source of dietary protein. The nutritional and functional properties of Rubisco are on a par with those of many animal proteins, and are superior to those of many other plant proteins. Purified Rubisco isolates are easily digestible, nutritionally complete, and have excellent foaming, gelling, and emulsifying properties. Despite this potential, challenges in efficiently extracting and separating Rubisco have limited its use as a global foodstuff. Leaves are lower in protein than seeds, requiring large amounts of biomass to be processed. This material normally needs to be processed quickly to avoid degradation of the final product. Extraction of Rubisco from the plant material requires breaking down the cell walls and rupturing the chloroplast. In order to obtain high-quality protein, Rubisco needs to be separated from chlorophyll, and then concentrated for final use. However, with increased consumer demand for plant protein, there is increased interest in the potential of leaf protein, and many commercial plants are now being established aimed at producing Rubisco as a food protein, with over US$60 million of funding invested in the past 5 years. Is now the time for increased use of Rubisco in food production as a nitrogen source, rather than just providing a carbon source?

An unexpected sticking point for carboxysome assembly.

In order to improve photosynthetic efficiency, bacteria often enclose RubisCO and carbonic anhydrase into microcompartments called carboxysomes. Assembly of these complexes requires a protein called CcmM. It had previously been thought that CcmM mediated RubisCO assembly by displacing one of the RubisCO subunits, Ryan et al. show that despite having a three-dimensional structure that closely resembles the RubisCO small subunit, CcmM does not dislodge it, leading to a proposal for an alternative binding location. These results provide a new model for carboxysome assembly with implications for photosynthetic engineering.

Functional and solution structure studies of amino sugar deacetylase and deaminase enzymes from Staphylococcus aureus.

N-Acetylglucosamine-6-phosphate deacetylase (NagA) and glucosamine-6-phosphate deaminase (NagB) are branch point enzymes that direct amino sugars into different pathways. For Staphylococcus aureus NagA, analytical ultracentrifugation and small-angle X-ray scattering data demonstrate that it is an asymmetric dimer in solution. Initial rate experiments show hysteresis, which may be related to pathway regulation, and kinetic parameters similar to other bacterial isozymes. The enzyme binds two Zn2+ ions and is not substrate inhibited, unlike the Escherichia coli isozyme. S. aureus NagB adopts a novel dimeric structure in solution and shows kinetic parameters comparable to other Gram-positive isozymes. In summary, these functional data and solution structures are of use for understanding amino sugar metabolism in S. aureus, and will inform the design of inhibitory molecules.

A helical LC3-interacting region mediates the interaction between the retroviral restriction factor Trim5α and mammalian autophagy-related ATG8 proteins.

The retroviral restriction factor tripartite motif-containing 5α (Trim5α) acts during the early postentry stages of the retroviral life cycle to block infection by a broad range of retroviruses, disrupting reverse transcription and integration. The mechanism of this restriction is poorly understood, but it has recently been suggested to involve recruitment of components of the autophagy machinery, including members of the mammalian autophagy-related 8 (ATG8) family involved in targeting proteins to the autophagosome. To better understand the molecular details of this interaction, here we utilized analytical ultracentrifugation to characterize the binding of six ATG8 isoforms and determined the crystal structure of the Trim5α Bbox coiled-coil region in complex with one member of the mammalian ATG8 proteins, autophagy-related protein LC3 B (LC3B). We found that Trim5α binds all mammalian ATG8s and that, unlike the typical LC3-interacting region (LIR) that binds to mammalian ATG8s through a ß-strand motif comprising approximately six residues, LC3B binds to Trim5α via the α-helical coiled-coil region. The orientation of the structure demonstrated that LC3B could be accommodated within a Trim5α assembly that can bind the retroviral capsid. However, mutation of the binding interface does not affect retroviral restriction. Comparison of the typical linear ß-strand LIR with our atypical helical LIR reveals a conservation of the presentation of residues that are required for the interaction with LC3B. This observation expands the range of LC3B-binding proteins to include helical binding motifs and demonstrates a link between Trim5α and components of the autophagosome.

Self-assembly of toroidal proteins explored using native mass spectrometry.

The peroxiredoxins are a well characterised family of toroidal proteins which can self-assemble into a striking array of quaternary structures, including protein nanotubes, making them attractive as building blocks for nanotechnology. Tools to characterise these assemblies are currently scarce. Here, assemblies of peroxiredoxin proteins were examined using native mass spectrometry and complementary solution techniques. We demonstrated unequivocally that tube formation is fully reversible, a useful feature in a molecular switch. Simple assembly of individual toroids was shown to be tunable by pH and the presence of a histidine tag. Collision induced dissociation experiments on peroxiredoxin rings revealed a highly unusual symmetrical disassembly pathway, consistent with the structure disassembling as a hexamer of dimers. This study provides the foundation for the rational design and precise characterisation of peroxiredoxin protein structures where self-assembly can be harnessed as a key feature for applications in nanotechnology.

Immobilization of tobacco etch virus (TEV) protease on a high surface area protein nanofibril scaffold.

Tobacco etch virus (TEV) protease is widely used for the removal of poly-histidine affinity tags from proteins. In solution, it is a one-time use enzyme for tag cleavage that has low stability, and is therefore a good candidate for immobilization. Amyloid fibrils can act as a versatile nanoscaffold by providing a large surface area for biomolecule immobilization. Immobilization of TEV protease to amyloid fibrils grown from the surface of a small glass bead, using physisorption, successfully immobilized active TEV protease. The bead retained activity over several uses and successfully cleaved a poly-histidine tag from several his-tagged proteins. This is first time that TEV protease has been immobilized to insulin amyloid fibrils, or any protein based support. Such functionalized surface assembled amyloid fibrils show promise as a novel nanosupport for the creation of functional bionanomaterials, for example, active surface coatings for the production of fine chemicals, chemical detoxification, or biosensing. Insulin amyloid fibrils provide a new nanosupport for the immobilization of TEV protease, which could allow for the reuse of the enzyme, saving on production costs for recombinantly expressed poly-histidine tagged proteins. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:1506-1512, 2018.

Structural and functional analyses of Rubisco from arctic diatom species reveal unusual posttranslational modifications.

The catalytic performance of the major CO2-assimilating enzyme, ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco), restricts photosynthetic productivity. Natural diversity in the catalytic properties of Rubisco indicates possibilities for improvement. Oceanic phytoplankton contain some of the most efficient Rubisco enzymes, and diatoms in particular are responsible for a significant proportion of total marine primary production as well as being a major source of CO2 sequestration in polar cold waters. Until now, the biochemical properties and three-dimensional structures of Rubisco from diatoms were unknown. Here, diatoms from arctic waters were collected, cultivated, and analyzed for their CO2-fixing capability. We characterized the kinetic properties of five and determined the crystal structures of four Rubiscos selected for their high CO2-fixing efficiency. The DNA sequences of the rbcL and rbcS genes of the selected diatoms were similar, reflecting their close phylogenetic relationship. The Vmax and Km for the oxygenase and carboxylase activities at 25 °C and the specificity factors (Sc/o) at 15, 25, and 35 °C were determined. The Sc/o values were high, approaching those of mono- and dicot plants, thus exhibiting good selectivity for CO2 relative to O2 Structurally, diatom Rubiscos belong to form I C/D, containing small subunits characterized by a short ßA-ßB loop and a C-terminal extension that forms a ß-hairpin structure (ßE-ßF loop). Of note, the diatom Rubiscos featured a number of posttranslational modifications of the large subunit, including 4-hydroxyproline, ß-hydroxyleucine, hydroxylated and nitrosylated cysteine, mono- and dihydroxylated lysine, and trimethylated lysine. Our studies suggest adaptation toward achieving efficient CO2 fixation in arctic diatom Rubiscos.

Quaternary structure influences the peroxidase activity of peroxiredoxin 3.

Peroxiredoxins are abundant peroxidase enzymes that are key regulators of the cellular redox environment. A major subgroup of these proteins, the typical 2-Cys peroxiredoxins, can switch between dimers and decameric or dodecameric rings, during the catalytic cycle. The necessity of this change in quaternary structure for function as a peroxidase is not fully understood. In order to explore this, human peroxiredoxin 3 (Prx3) protein was engineered to form both obligate dimers (S75E Prx3) and stabilised dodecameric rings (S78C Prx3), uncoupling structural transformations from the catalytic cycle. The obligate dimer, S75E Prx3, retained catalytic activity towards hydrogen peroxide, albeit significantly lower than the wildtype and S78C proteins, suggesting an evolutionary advantage of having higher order self-assemblies.

Archaeal Lsm rings as stable self-assembling tectons for protein nanofabrication.

We have exploited the self-assembling properties of archaeal-derived protein Lsmα to generate new supramolecular forms based on its stable ring-shaped heptamer. We show that engineered ring tectons incorporating cysteine sidechains on obverse faces of the Lsmα7 toroid are capable of forming paired and stacked formations. A Cys-modified construct, N10C/E61C-Lsmα, appears to organize into disulfide-mediated tube formations up to 45 nm in length. We additionally report fabrication of cage-like protein clusters through conjugation of Cu2+ to His-tagged variants of the Lsmα7 tecton. These 400 kDa protein capsules are seen as cube particles with visible pores, and are reversibly dissembled into their component ring tectons by EDTA. The ß-rich Lsmα supramolecular assemblies described are amenable to further fusion modifications, or for surface attachment, so providing potential for future applications that exploit the RNA-binding capacity of Lsm proteins, such as sensing applications.

Spacer capture and integration by a type I-F Cas1-Cas2-3 CRISPR adaptation complex.

CRISPR-Cas adaptive immune systems capture DNA fragments from invading bacteriophages and plasmids and integrate them as spacers into bacterial CRISPR arrays. In type I-E and II-A CRISPR-Cas systems, this adaptation process is driven by Cas1-Cas2 complexes. Type I-F systems, however, contain a unique fusion of Cas2, with the type I effector helicase and nuclease for invader destruction, Cas3. By using biochemical, structural, and biophysical methods, we present a structural model of the 400-kDa Cas14-Cas2-32 complex from Pectobacterium atrosepticum with bound protospacer substrate DNA. Two Cas1 dimers assemble on a Cas2 domain dimeric core, which is flanked by two Cas3 domains forming a groove where the protospacer binds to Cas1-Cas2. We developed a sensitive in vitro assay and demonstrated that Cas1-Cas2-3 catalyzed spacer integration into CRISPR arrays. The integrase domain of Cas1 was necessary, whereas integration was independent of the helicase or nuclease activities of Cas3. Integration required at least partially duplex protospacers with free 3'-OH groups, and leader-proximal integration was stimulated by integration host factor. In a coupled capture and integration assay, Cas1-Cas2-3 processed and integrated protospacers independent of Cas3 activity. These results provide insight into the structure of protospacer-bound type I Cas1-Cas2-3 adaptation complexes and their integration mechanism.

Structure and inhibition of N-acetylneuraminate lyase from methicillin-resistant Staphylococcus aureus.

N-Acetylneuraminate lyase is the first committed enzyme in the degradation of sialic acid by bacterial pathogens. In this study, we analyzed the kinetic parameters of N-acetylneuraminate lyase from methicillin-resistant Staphylococcus aureus (MRSA). We determined that the enzyme has a relatively high KM of 3.2 mm, suggesting that flux through the catabolic pathway is likely to be controlled by this enzyme. Our data indicate that sialic acid alditol, a known inhibitor of N-acetylneuraminate lyase enzymes, is a stronger inhibitor of MRSA N-acetylneuraminate lyase than of Clostridium perfringens N-acetylneuraminate lyase. Our analysis of the crystal structure of ligand-free and 2R-sialic acid alditol-bound MRSA N-acetylneuraminate lyase suggests that subtle dynamic differences in solution and/or altered binding interactions within the active site may account for species-specific inhibition.

Structure and Function of Cyanobacterial DHDPS and DHDPR.

Lysine biosynthesis in bacteria and plants commences with a condensation reaction catalysed by dihydrodipicolinate synthase (DHDPS) followed by a reduction reaction catalysed by dihydrodipicolinate reductase (DHDPR). Interestingly, both DHDPS and DHDPR exist as different oligomeric forms in bacteria and plants. DHDPS is primarily a homotetramer in all species, but the architecture of the tetramer differs across kingdoms. DHDPR also exists as a tetramer in bacteria, but has recently been reported to be dimeric in plants. This study aimed to characterise for the first time the structure and function of DHDPS and DHDPR from cyanobacteria, which is an evolutionary important phylum that evolved at the divergence point between bacteria and plants. We cloned, expressed and purified DHDPS and DHDPR from the cyanobacterium Anabaena variabilis. The recombinant enzymes were shown to be folded by circular dichroism spectroscopy, enzymatically active employing the quantitative DHDPS-DHDPR coupled assay, and form tetramers in solution using analytical ultracentrifugation. Crystal structures of DHDPS and DHDPR from A. variabilis were determined at 1.92 Å and 2.83 Å, respectively, and show that both enzymes adopt the canonical bacterial tetrameric architecture. These studies indicate that the quaternary structure of bacterial and plant DHDPS and DHDPR diverged after cyanobacteria evolved.

DNA G-quadruplexes show strong interaction with DNA methyltransferases in vitro.

The DNA methyltransferase enzymes (DNMTs) catalyzing cytosine methylation do so at specific locations of the genome, although with some level of redundancy. The de novo methyltransferases DNMT3A and 3B play a vital role in methylating the genome of the developing embryo in regions devoid of methylation marks. The ability of DNMTs to colocalize at sites of DNA damage is suggestive that recognition of mispaired bases and unusual structures is inherent to the function of these proteins. We provide evidence for G-quadruplex formation within imprinted gene promoters, and report high-affinity binding of recombinant human DNMTs to such DNA G-quadruplexes in vitro. These observations suggest a potential interaction of G-quadruplexes with the DNA methylation machinery, which may be of epigenetic and biological significance.

The epigenetic regulator Smchd1 contains a functional GHKL-type ATPase domain.

Structural maintenance of chromosomes flexible hinge domain containing 1 (Smchd1) is an epigenetic regulator that plays critical roles in gene regulation during development. Mutations in SMCHD1 were recently implicated in the pathogenesis of facioscapulohumeral muscular dystrophy (FSHD), although the mechanistic basis remains of outstanding interest. We have previously shown that Smchd1 associates with chromatin via its homodimeric C-terminal hinge domain, yet little is known about the function of the putative GHKL (gyrase, Hsp90, histidine kinase, MutL)-type ATPase domain at its N-terminus. To formally assess the structure and function of Smchd1's ATPase domain, we have generated recombinant proteins encompassing the predicted ATPase domain and the adjacent region. Here, we show that the Smchd1 N-terminal region exists as a monomer and adopts a conformation resembling that of monomeric full-length heat shock protein 90 (Hsp90) protein in solution, even though the two proteins share only ∼8% overall sequence identity. Despite being monomeric, the N-terminal region of Smchd1 exhibits ATPase activity, which can be antagonized by the reaction product, ADP, or the Hsp90 inhibitor, radicicol, at a nanomolar concentration. Interestingly, introduction of an analogous mutation to that identified in SMCHD1 of an FSHD patient compromised protein stability, suggesting a possible molecular basis for loss of protein function and pathogenesis. Together, these results reveal important structure-function characteristics of Smchd1 that may underpin its mechanistic action at the chromatin level.

Peroxiredoxin is a versatile self-assembling tecton for protein nanotechnology.

The potential for protein tectons to be used in nanotechnology is increasingly recognized, but the repertoire of stable proteins that assemble into defined shapes in response to an environmental trigger is limited. Peroxiredoxins (Prxs) are a protein family that shows an amazing array of supramolecular assemblies, making them attractive tectons. Human Prx3 (hPrx3) forms toroidal oligomers characteristic of the Prx family, but no structure has been solved to date. Here we report the first 3-D structure of this protein, derived from single-particle analysis of TEM images, establishing a dodecameric structure. This result was supported by SAXS measurements. We also present the first detailed structure of a double toroidal Prx from a higher organism determined by SPA. Guided by these structures, variants of the protein were designed to facilitate controlled assembly of protein nanostructures through the association of the toroids. We observed an enhanced population of stacked toroids, as seen by TEM; nanocages and interlocked toroids were also visible. Low pH was successfully predicted to generate long ordered nanotubes. Control over the length of the tubes was gained by adding ammonium sulfate to the assembly buffer. These versatile assembly properties demonstrate the considerable potential of hPrx3 as a tecton for protein nanotechnology.

From knock-out phenotype to three-dimensional structure of a promising antibiotic target from Streptococcus pneumoniae.

Given the rise in drug-resistant Streptococcus pneumoniae, there is an urgent need to discover new antimicrobials targeting this pathogen and an equally urgent need to characterize new drug targets. A promising antibiotic target is dihydrodipicolinate synthase (DHDPS), which catalyzes the rate-limiting step in lysine biosynthesis. In this study, we firstly show by gene knock out studies that S. pneumoniae (sp) lacking the DHDPS gene is unable to grow unless supplemented with lysine-rich media. We subsequently set out to characterize the structure, function and stability of the enzyme drug target. Our studies show that sp-DHDPS is folded and active with a k(cat) = 22 s(-1), K(M)(PYR) = 2.55 ± 0.05 mM and K(M)(ASA) = 0.044 ± 0.003 mM. Thermal denaturation experiments demonstrate sp-DHDPS exhibits an apparent melting temperature (T(M)(app)) of 72 °C, which is significantly greater than Escherichia coli DHDPS (Ec-DHDPS) (T(M)(app) = 59 °C). Sedimentation studies show that sp-DHDPS exists in a dimer-tetramer equilibrium with a K(D)(4→2) = 1.7 nM, which is considerably tighter than its E. coli ortholog (K(D)(4→2) = 76 nM). To further characterize the structure of the enzyme and probe its enhanced stability, we solved the high resolution (1.9 Å) crystal structure of sp-DHDPS (PDB ID 3VFL). The enzyme is tetrameric in the crystal state, consistent with biophysical measurements in solution. Although the sp-DHDPS and Ec-DHDPS active sites are almost identical, the tetramerization interface of the s. pneumoniae enzyme is significantly different in composition and has greater buried surface area (800 Å(2)) compared to its E. coli counterpart (500 Å(2)). This larger interface area is consistent with our solution studies demonstrating that sp-DHDPS is considerably more thermally and thermodynamically stable than Ec-DHDPS. Our study describe for the first time the knock-out phenotype, solution properties, stability and crystal structure of DHDPS from S. pneumoniae, a promising antimicrobial target.

Small oligomers of ribulose-bisphosphate carboxylase/oxygenase (Rubisco) activase are required for biological activity.

Ribulose-bisphosphate carboxylase/oxygenase (Rubisco) activase uses the energy from ATP hydrolysis to remove tight binding inhibitors from Rubisco, thus playing a key role in regulating photosynthesis in plants. Although several structures have recently added much needed structural information for different Rubisco activase enzymes, the arrangement of these subunits in solution remains unclear. In this study, we use a variety of techniques to show that Rubisco activase forms a wide range of structures in solution, ranging from monomers to much higher order species, and that the distribution of these species is highly dependent on protein concentration. The data support a model in which Rubisco activase forms an open spiraling structure rather than a closed hexameric structure. At protein concentrations of 1 µM, corresponding to the maximal activity of the enzyme, Rubisco activase has an oligomeric state of 2-4 subunits. We propose a model in which Rubisco activase requires at least 1 neighboring subunit for hydrolysis of ATP.